Groove Tube
|
|
Groove Tubes GT6L6S Tube $46.8 Groove Tubes GT6L6S Tube |
|
|
Groove Tubes GT-12AX7-R2 Preamp Tube $29.99 Groove Tubes GT-12AX7-R2 Preamp Tube |
|
|
Groove Tube - $14.99 Channel One was a New York-based comedy group which presented short satirical sketches concerning television. What set this group apart was that they performed in front of genuine TV cameras, while the audience watched on TV monitors strategically placed throughout the theater. Many of the best, and most censurable, Channel One sketches were assembled by the group’s mentor Ken Shapiro and released to theaters as the feature-length The Groove Tube. Shapiro himself stars in several of the sketches, most notably as “Koko the Clown,” a kiddie-show host whose idea of “Make Believe Land” consists of smoking a joint and reading passages from Fanny Hill. Most of the Channel One players will be unfamiliar to audiences of the 1990s, save for Richard Belzer and Chevy Chase, the latter offering a most unusual rendition of “I’m Looking Over a Four Leaf Clover.” The Groove Tube was originally rated X, thanks to such bits as “Safety Sam,” wherein the audience is offered cheerful anti-VD advice by a talking penis. ~ Hal Erickson, Rovi |
|
|
The Groove Tube $16.55 Rated: RSynopsis: Channel One was a New York-based comedy group which presented short satirical sketches concerning television. What set this group apart was that they performed in front of genuine TV cameras, while the audience watched on TV monitors strategically placed throughout the theatre. Many of the best, and most censurable, Channel One sketches were assembled by the group’s mentor Ken Shapiro and released to theatres as the feature-length The Groove Tube. Shapiro himself stars in several of the sketches, most notably as “Koko the Clown,” a kiddie-show host whose idea of “Make Believe Land” consists of smoking a joint and reading passages from Tropic of Cancer. Most of the Channel One players will be unfamiliar to audiences of the 1990s, save for Richard Belzer and Chevy Chase, the latter offering a most unusual rendition of “I’m Looking Over a Four Leaf Clover.” Groove Tube was originally rated X, thanks to such bits as “Safety Sam,” wherein the audience is offered cheerful anti-VD advice by a talking penis. Hal EricksonPRODUCTION AND TECHNICAL NOTES:Features: Original theatrical trailer; Chapter search featureTime: 1 Hour 14 Minutes |
|
|
Groove Tubes Silver Series ST-6L6-R Power Tube $17.95 Groove Tubes Silver Series ST-6L6-R Power Tube |
|
|
Groove Tube [VHS] $19.95 This collection of satirical sketches about television was released in 1974, the heyday of obvious pop-culture humor along the lines Cheech and Chong. With Saturday Night Live still a few years away, Chevy Chase made an appearance here, and one can see the acute sensibility that would redefine television comedy in its early form. Some of the gags work well but most are pretty dispensable; some are… |
|
|
The Sex O’clock News … |
|
|
The Groove Tube $49.96 … |
|
|
General Tool 125 Heavy Duty Cutter $7.99 This vice style heavy duty cutter from General Tools has been designed with a comfort grip for heavy duty and industrial applications. The cutter wheel is made from hardened steel and the rollers are flare groove. This device is meant to cut through copper, aluminum, and most other metal tube types…. |
A Strong Dado Blade Fitted In A Power Saw Will Be Very Useful If You Want To Straightaway Cut A Track Into Your Cabinet. Tracks Also Can Be Made By Surface Mounting Strips Of Wood Or Moldings So That Twin Grooves Are Formed.
Sliding doors are liable to have issues regarding their functioning but the probability can be minimized by using the best material and finishing for it. The key to smoothly working sliding doors is straight, accurately installed tracks. Ready-made tracks for sliding doors, made of wood, plastic and aluminum are easily available.
While different types of nails are required to fix all the tracks in place, wooden tracks additionally require glue. To prevent splitting or cracking plastic or wood, drill pilot holes slightly smaller than the nails. A set of tracks has two strips, one for deep groves and one for shallow grooves. The track with the deeper grooves is always fixed on the top. If you enjoy garage doors articles like this one, visit double garage door for other resources.
Half the size of the opening with the addition of around half an inch will be the width of the sliding door. Pushing the panel out of the way will solve the problem of obstruction of the cabinet spaces.
An important decision every do it yourselfer has to make is to determine the correct thickness of the door. If you have a small cabinet, about twenty-four inches deep, you will get many 1/8 inch thick materials in the market. This range also consists of filigree hardboards and multi-colored plastic sheets with embossed patterns. Doors of this size don't need a width of more than half an inch even though the option can be explored.
Many dealers have now started taking special orders and they cut out the wooden panels which are generally sized 4 by 8 feet. Confusion regarding which material to choose reduces once the needed thickness has been determined. The plain or patterned filigree hardboard can be found in its two most common sizes, either 1/8 inches thick or the less common 1/4 inch version. Visit roller door motor for more great resources on garage doors.
Paneling that is otherwise used just for walls can be utilized in making in beautiful sliding doors as it comes in a host of wood grain finishes and patterns. Wall paneling is an excellent material for making doors and if there is any leftover paneling it can also be recycled to make doors.
Plastic which is rigid can also be used; it fits very nicely into tracks of a 1/8 inch width and is found generally in a panel sized 2 by 4 feet. There is no finishing that is required and the plastic does not absorb any moisture although it is hard and can crack. The plastic can be sawed to size with a fine toothed blade in a saber saw. Hardwood with birch, oak or other attractive wooden ply on top looks the best on the doors but cheaper grades of plywood will also do.
|
|
1 1/2 V-Groove Feed Roll Kit $65.33 ESB1137: Features: -Price Is For One Kit -Minimum Order Of 1.-ESAB Wire Feeders used for Mig 35, Digmig, Digmig Dual, Digipulse Dual, EH-10A, EH-10A digital, EH-11 and EH-11 digital.-Genuine Heliarc accessories.-UNSPC CODE: 23171500.-Wire Feeder Accessories Wire Feeder Accessories welders feeders drive roll feed accessory inlet guide gun head tube outlet guide kit groove. Specifications: -FEED ROLL KIT 1-1/2 V 045. |
|
|
1.5 Spline Shank Rotary Hammer $296.99 HIT2571: Hitachi s DH38YE2 spline shank rotary hammer is the next generation in Hitachi hammer technology. Compared to its predecessor the DH38YE, the DH38YE2 s power is packed into a more ergonomic body that is 2.9 lbs lighter, delivers less vibration and a lower noise level. A simple turn of the knob changes the mode from hammer drilling to hammer only, allowing the DH38YE2 to take on a variety of tasks including; drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. The DH38YE2 Rotary Hammer is used for crushing, demolition, groove-digging, edging, trimming, removal of concrete, drilling concrete and drilling anchor bolt holes. Applications include installation of air conditioning, piping and wiring, electric fixtures, sanitary facilities, interior finishing and other building, construction and repair work. Features: -5.9 ft-lbs of impact energy delivering high-speed drilling and forcible chipping. -8.4 Amp motor delivers maximum productivity. -2 modes of operation hammer and drill and hammer only for flexibility within a range of applications. -Sealed grease system ensures minimal maintenance. -Dust proof cover protects tool for extended maintenance free operation. -Auto-stop carbon brush system to prolong tool life and protect armature. -Removable side handle with depth gauge improves control and ensures accurate drilling depth. -Safety clutch improves user protection in bound bit situations. Specifications: -Power Imput: 8.4 amps; 950 watts. -Solid Bit capacity: 1-1/2 inches. -Core Bit capacity: 4-1/8 inches. -RPM(full load): 510/ min. -BPM (full load): 2,800/ min. -Impact Energy: 5.9 ft/lbs. -Overall length 16-11/32. Includes: -Depth Gauge. -Side Handle. -Injection Molded Carrying Case for storage of bits, a side handle and other accessories.. -3 Dust Covers. -Hex Wrench. -Hammer Grease (1oz tube). |
